Doctor, the blades scrape the ink from the plate cylinder or tamil radio analog roller. Doctor, you analog paint directly onto the reservoir area or in grave printing machine scraping excess paint on the printing cylinder. If squeegee in the printing unit cylinder reservoir system. Papal on roller (anion or printing cylinder) are sent to the appropriate forces imposed a squeegee and permanently ink into the reservoir through the hose. Excess ink is scraped with a squeegee through the cylinder. The excess ink in the main chamber doctor blade chamber rotates tamil radio through another hose. Thus, it is prevented that the destruction of the volatile in the ink is not contacted with air. Squeegee pressure adjustment is made as follows: the ink from the cylinder surface are benefiting from squeegee to scrape the excess.
Over the ink when it is peeled off, it will only print areas (pits) remains in the ink. The quality of apprenticeship in the printing done today is to the fore. They were used before the end of the squeegee ground. It was constantly click here changing due online radio app to the abrasion contacting portions of the squeegee roller type. This could also affect print quality. Today, the end portion of the thin body thickness sharpened half squeegee have been used. The cylinders tamil radio are continually moved in contact with the right angle and quality printing. This scraper blade squeegee pressure should not leave the trail. Grave doctor blade scraper (punch) connected in parallel to the cylinder.
Because the scraper blade is worn out very quickly, it must be replaced frequently. Scraper blade is touching the back angle doctor blade consists of a hydro-dynamic pressure and back pressure which occurs due to tamil radio the ink fluidity. This pressure should be checked if manually or automatically. Quite sharp scraper in modern grave printing machines squeegee angle should be preferred. Usually the doctor blade scraper should be 55º-65º contact angle. Joining angle is important for a good result. Squeegee pressure settings are made automatically from the edge panel on the unit. Too much pressure will result in faster wear the squeegee setting, while the less ink will not peel properly squeegee. Electrostatic printing assistance (Electrostatic Assist/ ESA), the ink inside.
Pressure cylinder screens the electric field strength, allowing the material to be transferred completely to prevent the loss of points, especially in the halftone works. Each has tamil radio its own drying unit of the grave printing unit. This material surrounds one or both sides with pressure air stream. It reaches into every other color unit as dry colors. When the rotogravure printing system held fast ink drying time on the film it is important. The age of the ink still drying as soon as possible, distributed in the transition from other units and the online radio app desired color, the print tamil radio quality can not be achieved. Hot air system is used for the ink to dry. Material online radio app and surface structure of the applied thermal stress varies depending on the density of the inked areas.
